Description
Features: Synergic function, preset voltage is matched with current automatically. Both current and voltage are pre-settable Toughness. Test to strict IP23 Classsifications-designed for “”Real”” industrial conditions PCB’s filled with epoxy double locked and environmentally protected wirering connector connectors Boards are carefully located to provide maximum protection from the environment 5 position switch for welding mode selection enabling the operatorto easily select his selected welding output for he welding application Full remote and multi-process capability-Stick, Touch-Start TIG, MIG & Flux-coredgreat arc starts minimizing tungsten contamination
Digital Meters : provide accurate weld parameters reading which are retained after welding Allow auto fault diagnostic display 5 – 500 A output range for all recommended processes which is low enough for TIG welding on thin metal and robust enough for sticking welding with 6 mm electrode
Sturdy Easy Access Panel Door protects multi-pin control control and weld terminal processes: GMAW, FCAW, GTAW (Hz Input power: 380V~415V(±10%) / 3 / 50 / 60 Hz
Rated output Current/Voltage/Duty cycle [SMAW]: 500A/40V/60% | 390A/35.6V/100%
Rated output Current/Voltage/Duty cycle [GMAW]: 500A/39V/60% | 390A/33.5V/100%
Rated Current/Voltage/Doltage30% | 390A/25.6V/100%
Power input at rated output (KVA): 23 @ 60%
Output Range [SMAW]: 20.6~40V | 15~500A
Output Range [GMAW]: 16~39V | 50~500A
Output Range [GTAW]: 10.2~30V | 5~500A
What’s included : Wire Feeder Separate; Interpass 5 mtr; Feed Roll 0.8 – 1.0 mm; MIG Gun – 4 Mtr; Ground Clamp 400A; Ground Cable 50 mm² x 2 mtr; Cable Plug Skun; Regulator CO2 220V; Tabung CO2 6m³; Welding Wire Ø 0.8 mm 1 roll – 15 kg; Input Power Cable 2 mtr.
Reviews
There are no reviews yet.